500 кВт/625 кВА Тип мобильного питание от генератора CUMMINS набор

Спецификации 1.Генератор с водяным охлаждением комплект \Н2.Сертификат CUMMINS ОЕМ \Н3.ИСО9001-2008 \справка Н4.Низкий расход топлива \Н\Н Технические характеристики 500 кВт передвижная Тип работает на CUMMINS комплект генератора:

Section A. Technical Specification
1. Specification of genset
Gensets model				KH-500GF
Prime power				500KW
Rated Voltage				400/230V
Rated frequency(HZ)				50
Rated Speed				1500rpm
Power Factor				0.8(lagging)
Dimensions(mm) (L×W×H)				3600×1300×2000
Net Weight(kg)				4100
2. Specification of diesel engine
Engine brand				Cummins
Engine model				KTAA19-G6A
Number of Cylinders				6
Cylinder arrangement				Vertical in-line
Cycle				Four stroke
Aspiration				Turbocharged after water cooled
Bore×Stroke (mm×mm)				159x 159
Displacement (Liter)				18.9
Compression Ratio				14.5:1
Speed Governor				Electrical
Cooling System				Water cooled
Speed Stability (%)				≤5%
Total lubrication system capacity (L)				50
Fuel Consumption at 100% Load (L/h)				203.8
Starting Method				DC24V Electrical starting
3. Specification of alternator
Alternator brand				Stamford
Alternator model				HCI544F-S
Number of Phase				3
Connecting Type				3 Phase and 4 Wires
Number of Bearing				1
Protection Grade				IP23
Exciter Type				Brushless ,Self-exciting, AVR automatic voltage regulating,100% Copper winding wire
Insulation Class				H
THF				≤2%
Voltage Regulation, Steady State				≤±0.5%
Transient State Voltage				≤-15%~+20%
4. Specification of control Panel(with KAIXUN LCD controller)
The control panel is Ordinary integrative type control panel, with the display of voltage,current, frequency, water temperature, oil pressure. The genset with low oil pressure,high water temperature,over speed,over load protection function.
The features of KAIXUN LCD controller:
KAIXUN LCD controller adopts high performance computer chip, can modify control procedure and protection parameters of generator, which incorporating measure, control, protection and three remote functions and so on, can fully satisfactory different kinds of Genset auto control requirements for generator user and or special assembly factory.
The controller measure and display all output digital parameters for generator, and rpm, oil pressure, water temperature, DC voltage and runtime for engine. And the voltage and current use real virtual value measure to make sure the data more exacter.
• Chinese/English menu for your choice, large LCD display.
• Can select kinds of preset PT-sensor, and can custom parameter by corresponding software.
• Keys on control panel are used for selecting control mode, startup running procedure, data display and modify the protection parameter. LED indicator is used for indicating the controller running mode and Genset running status, and LCD display measuring parameter and status.
• Can select RS485 or RS232 communication port, realizing long distance monitor, and or fully realizing remote signaling, telemetering and remote control functions by communication with PC, can read and setting controller running parameter.
• The controller is assembled by high strength plasticized panel and powdered steel shell, all connection are connected by pin-like and locked up terminal, more easier and convenient to connect, move, maintain and replace.

 

Группа Продуктов : Мощность дизельных генераторов от двигателя CUMMINS