прицеп генератора/передвижные с дизельным приводом на CUMMINS

прицеп генератора/передвижные с дизельным двигателем с CUMMINS из CUMMINS тепловозный генератор | тепловозный комплект CUMMINS | передвижной трейлер

Technical Specification
1. Specification of genset
Genset Model				KH-80GF
Prime Power( KW )				80
Rated Voltage(V)				400/230
Rated Frequency(HZ)				50
Rated Speed				1500rpm
Power Factor				0.8(lagging)
Dimensions(mm) (L×W×H)				3000x1950x2700
Net Weight(kg)				2556
2. Specification of diesel engine
Engine Brand				Cummins
Engine Model				6BT5.9-G2
Number of Cylinders				6
Cylinder Arrangement				Vertical in-line
Cycle				Four stroke
Aspiration				Turbo
Bore×Stroke (mm×mm)				102×120
Displacement (Liter)				5.9
Compression Ratio				17.5:1
Speed Governor				Electronic
Cooling System				Forced Water Cooling Cycle
Lub. oil capacity (L)				16.4
Fuel Consumption, Stand-by (g/kw.h)				214
Starting Method				DC 24V Electrical starting
3. Specification of alternator
Alternator Brand				Stamford
Alternator Model				UCI274C
Number of Phases				3
Connecting Type				3 Phases and 4 Wires
Number of Bearing				1
Protection Grade				IP23
Altitude				≤1000m
Exciter Type				Brushless ,Self-exciting, AVR automatic voltage regulating,100% Copper winding wire
Insulation Class				H
Telephone Influence Factor (TIF)				≤50
THF				≤2%
Voltage Regulation, Steady State				≤±1%
Transient State Voltage				≤-15%~+20%
4. Specification of control Panel(with ComAp controller)
The control panel is AMF control panel, with the display of voltage,current, frequency, water temperature, oil pressure. The genset with alarm of low oil pressure,high water temperature,over speed,over load protection function.
The features of ComAp controller:
ComAp controller is a new generation Automatic control module for single Genset, which adopts bran-new outline configuration, focus on the requirements of customers, and perfectly improves the performance of controller. It fully meets the auto control requirements of different kinds of Genset for user or special assembly factory.
The module also monitors and protects the engine, indicating operational status, fault conditions and metering on the front panel LCD and LED’s.
• True RMS measure of voltage and current.
• Multi-Language menu.
• 128 x 64 pixel LCD display.
• 4 analog inputs for kinds of optional sensors that can be used for measuring oil pressure, coolant temperature, fuel level and so on; parameters can be configured by user.
• More outputs of configurable auxiliary control relays.
• More configurable isolated digital inputs.
• Buttons on control panel are used for selecting control modes, starting and stopping the operating procedure, displaying data and modifying the parameters. LED indicators are used for indicating the operation mode of controller and the running status of Genset, and LCD displays each measuring parameter and status.
• Flexible equipped with RS485, RS232 and USB, realizing remote monitor; or communicated with PC, fully realizing functions of remote signaling, telemetering and remote control, can read and set the running parameters of controller.
• With GPRS-DTU or Ethernet-DTU for remote communication instead of RS485, RS232, or USB port for remote communication.
• Optional CANbus, read and control the parameters for ECU engine.
• All connections of the controller are by secure plug and socket, for ease and convenience to connect, move, maintain and replace the device.

                               

Группа Продуктов : Передвижные дизельные генераторы